Carbon Black Content Apparatus as per BS:2782 and ASTM D1603

Carbon Black Content Apparatus as per BS:2782 and ASTM D 1603 Carbon Black Content Apparatus is used for determining carbon black content in polyethylene and polypropylene materials. It is calculated by getting the difference in weight before and after treatment in the apparatus. Carbon black content of plastics test instruments consists of:-  Electric Furnace, at least 20 cm (8 in.) long suitable for use with the tubing Tubing,, 4 2.9 cm (1⁄8 in.) in diameter, approximately twice as long as the furnace  Stoppers—Two rubber or neoprene stoppers, to fit the tube described in 4.2, unless the tube is fitted with ground joints and mating connectors. Glass Tubing, 10-mm, of sufficient amount, and matching rubber or plastic tubing for connections. Combustion Boat, approximately 8 by 1.9 by 1.3 cm (31⁄2 by 3⁄4 by 1⁄2 in.). Glazed porcelain, quartz high-silica glass, or platinum is suitable. NOTE 2—A loose-fitting cover for the combustion boat is optional. If used, it shall be considered a part of the boat and handled and weighed with it. Iron-Constantan Thermocouple, and a potentiometer or millivoltmeter suitable for determining temperatures in the range 300 to 700 C. Flow Meter, 5 suitable for measuring gas flow at rates of 1 to 10 L/min. Traps, three glass traps with removable ground-glass connected heads and 10-mm diameter inner and connecting tubes. Standard Compliance: ASTM D1603-14, IS 2530, IS 4984 Model No. Specification: Temperature Range: Room temp. to 1150 °C Size: 6 X 6 X 6 inches Inside apparatus is stainless steel and the outer side is mild steel It is powder-coated Power requirement is 230V, 50Hz, single phase Accessories: Glass U tube, Rotometer, Desiccator, Combustion tube, Combustion boat, 1 rubber tube, 2 glass end caps, 3 glass traps. Features: It is supplied with 2 separate glass flasks. It has a programmable P.I.D. temperature Controller It has quartz glass which can resist high temperature The heater uses low voltage which ensures the high validity of the furnace.     Carbon Black Content Apparatus as per BS:2782 and ASTM D 1603 Category: General & Physical Tests Tags: ASTM D 1603, Carbon Black Content Apparatus, carbon black tester, carbon content test